Content
Update: 05/07/2022
The source of domestic wastewater is mainly concentrated in residential areas, apartment buildings, adjacent villas, office buildings, restaurants, small businesses, shopping centers, entertainment areas, schools...

Domestic wastewater has a very high pollution index. If not treated promptly with appropriate measures, it can be the cause of environmental pollution or the formation of diseases that directly affect human health. To have the most effective treatment, it is necessary to understand the characteristic parameters.
So, what are those parameters? According to environmental experts, the characteristic parameters of domestic wastewater are the physical, chemical, and biological parameters present in this type of wastewater. They have many different indices compared to industrial wastewater, hospital wastewater... Therefore, the treatment methods will also be different.
The physical characteristics in domestic wastewater include factors such as: Total solid content in water, water odor, temperature, turbidity, and water smell. Specifically as follows:
In domestic wastewater, the solid content is quite high, including components such as: Insoluble solids, suspended solids, and some compounds dissolved in water. In urban wastewater, the total solid content accounts for about 45 - 65%.
They exist in the form of suspended layers, floating on the water surface, or settling down to the bottom. Among them, solid substances with the ability to settle or settle quickly are usually easier to treat by simpler methods than suspended solids.
Initially, domestic wastewater hardly produces unpleasant odors. However, after a period combined with various factors and the biological decomposition process in the form of anaerobic, they begin to produce a series of strong foul odors.

The more unpleasant the odor of wastewater, the higher the pollution level, and vice versa. Therefore, odor needs to be considered to serve the most appropriate treatment method.
Basically, domestic wastewater will have a higher temperature than tap water. The reason is that this water source is discharged from warm water sources due to the impact of living and commercial activities. However, compared to the air temperature, the temperature of domestic wastewater is lower.
The temperature of domestic wastewater is a very important parameter. Because it directly affects the life of organisms in water, the dissolution of oxygen, and the bacterial decomposition process. In addition, all wastewater treatment systems must undergo a biological treatment process, which is greatly affected by temperature.
The color of domestic wastewater is usually created by the decomposition of organic substances in water. They have specific characteristic indices and are used to assess the general pollution level of wastewater sources.

Turbidity is a characteristic parameter of wastewater regarding the content of suspended organic matter, colloidal substances, causing water to lose transparency. To check the turbidity of wastewater, a turbidity measuring unit: NTU is used.
Chemical and biological parameters require specific characteristic parameters of domestic wastewater including: pH, chemical oxygen demand, biochemical oxygen demand, nitrogen content, surfactants, dissolved oxygen, heavy metal parameters, and toxic substances. Specifically as follows:
The pH value is determined by the acidity and alkalinity in water. This is an important parameter when evaluating the characteristics of domestic wastewater. Because this concentration directly affects the biological rate in water and biological wastewater treatment models need to be carried out in water environments with a pH fluctuating from 6.5 - 8.5 to achieve the highest efficiency.

According to recent statistics, domestic wastewater currently has a pH ranging from 6.9 - 7.8, so neutralization measures may not be necessary during treatment.
It is the amount of oxygen needed to oxidize organic matter in wastewater. The unit used to measure the chemical oxygen demand concentration is usually mgO2/L or mg/L. The determination of COD concentration in domestic wastewater is done by the dichromate method.
In this case, potassium dichromate is used as a strong oxidizing agent to oxidize complex organic matter. Next, the amount of potassium dichromate is titrated with a molybdenum salt solution.
This is a prominent characteristic parameter of domestic wastewater caused by biodegradation of organic matter. Biochemical oxygen demand is determined by calculating the amount of oxygen needed to degrade dissolved organic matter, suspended organic matter, and colloidal substances.
Along with the participation of microorganisms in aerobic conditions. The unit of biochemical oxygen demand is calculated in MgO2/L or Mg/L. Currently, domestic wastewater typically has BOD = 68% compared to COD.
Inorganic nitrogen and organic nitrogen. In domestic wastewater, most inorganic bonds include NH4+, NH3 groups, and oxidized forms: NO2– and NO3– for treated wastewater. Untreated wastewater usually does not contain NO2– and NO3–. The organic bonds in wastewater are mainly compounds originating from excess food protein.
Surfactants are mainly generated from the use of detergents in daily life. These are organic compounds with two basic properties: hydrophilic and hydrophobic. Thus, they dissolve substances in water and in oil.
The presence of surfactants directly affects the process of domestic wastewater treatment in the future. Because they impede the settling of suspended solids, causing foaming. This reduces the efficiency of the biological treatment process.
In general, the amount of dissolved oxygen in domestic wastewater is usually very low. However, in aerobic biological treatment processes, a large amount of dissolved oxygen is required, at least 2mg/l must be achieved. In addition, the treated domestic wastewater must have a dissolved oxygen content greater than 4mg/l to meet the standard of drinking water and 6mg/l for fish farming water.

The characteristic parameter of dissolved oxygen is very important in the process of treating aerobic domestic wastewater. Therefore, it is necessary to pay special attention and evaluate accurately to ensure the most effective water filtration operation in the future.
Among these parameters, the content of heavy metals and toxic substances is a very important factor that needs attention and research. In domestic wastewater, there are heavy metals and toxic substances such as: Copper, lead, cobalt, chromium, cadmium, nickel, mercury... These substances hinder the biological treatment process of wastewater.
Domestic wastewater usually contains a certain amount of microorganisms. Among them, there are types that can cause diseases to the human digestive system. E.Coli bacteria is a typical example. This type of bacteria accounts for a very high proportion in the microbial system of domestic wastewater. They can survive in harsh environmental conditions.
Furthermore, this type of bacteria is the main factor causing intestinal diseases in humans, and if not treated promptly, it can lead to death, especially in children. Therefore, determining microbial parameters in domestic wastewater to have appropriate treatment measures is extremely important and necessary.
With the above sharing of ours about the characteristic parameters of domestic wastewater. We hope that it has helped you understand more about the biological, physical, and chemical characteristics in this type of water.
From there, build safe and effective domestic wastewater treatment systems. For more detailed information, please contact us at the hotline: 0913.543.469 for direct advice and support from professional water treatment experts.
Update: 05/07/2022
Effective Pharmaceutical Wastewater Treatment Solutions from Toan A JSC
Created at: 04/09/2024
Optimal Solution for Medical Wastewater Treatment from Toan A JSC
Created at: 04/09/2024
Advanced domestic wastewater treatment technology by Toan A JSC
Domestic wastewater is one of the largest sources of pollution to the environment if not treated properly. In Vietnam, besides individual households, urban areas, apartment buildings, restaurants, hotels, and service establishments are required to comply with the treatment of domestic wastewater according to the QCVN 14:2008 standard set by the Ministry of Natural Resources and Environment to ensure environmental safety and human health. Currently, there are many methods for treating domestic wastewater, each with its own characteristics and specific applications, suitable for different types of wastewater and specific requirements. Let's explore this issue further with Toan A JSC in the following article!
Created at: 14/08/2024
Contact quickly
contact@toana.vn
L7-39 KĐT Athena Fulland, Đại Kim, Hoàng Mai, HN
Toàn Á có thể hỗ trợ gì cho anh chị ạ?